NTN 6203lua Bearing

✖

Home

Stock Categories

Technical Articles

Angular Contact Ball Bearings

Cylindrical Roller Bearings

Flange Block Bearings

All Categories
View All >

Featured Products

Our Manufacturer with main products: Angular Contact Ball Bearings, Cylindrical Roller Bearings, Flange Block Bearings

FAQS

QWhat is cylindrical roller bearing?

AA cylindrical roller bearing can support light-thrust movement, with the double-row type also able to support axial loads in both directions. Cylindrical roller bearings are also available in sealed or split designs. In sealed bearings, the rollers are protected from contaminants, water and dust, while providing lubricant retention and contaminant exclusion. This provides lower friction and longer service life.

QWhat is Angular Contact Ball Bearings?

ANTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service. The bearings in this series are assembled with a specific internal clearance, so that they will have a specified contact angle under load. single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

QWhat is Flange Block Bearings?

ABearing Housings. Mate one of these housings with your own bearing to create a custom mounted bearing. Two bolt flange bearings are used in applications where a flange bearing is needed and the space is limited. Be sure to refer back to these pages frequently. We are always updating and adding sizes and styles. UCFL200 Series. Standard duty two bolt flange bearing with a wide inner ring and two set screws

QWhat is Needle Non Thrust Roller Bearings?

AIn applications where the faces of adjacent machine components can serve as raceways, needle roller thrust bearings take up no more space than a conventional thrust washer. The needle roller bearing used in combined bearings has an annular groove with one lubrication hole in the outer ring. Needle roller / full complement thrust ball bearings in the NX series without the designation suffix Z have a cover with lubrication holes over the thrust part of the bearing ().Most often they are oil lubricated and, therefore, SKF supplies these bearings without grease.