ISOSTATIC SS-3236-28 Sleeve Bearings

Locating ring:2 x FRB 10/400; L:700 mm; Mass housing:187 kg; H2:95 mm; Q120°:2860 kN; N:42 mm; Initial grease fill, 20%:2.1 kg; P180°:1700 kN; H:474 mm; End cover:ETS 48;

B:42.00 mm; D:265.0000 mm; d:170.000 mm; Basic Static Radial Load Rating Co:232000 N; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:190000 N; Grease Speed Rating n1:1600 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2700 rpm;

C2:2.9 mm; d1 ≈:227.5 mm; B:80 mm; Mass bearing:13.1 kg; Snap ring Seeger:SW 270; b:5.2 mm;   +:0.2 mm; r3,4 min.:0.6 mm; K:4 mm; Basic static load rating C0:1370 kN;

F:672 mm; K:9 mm; b:16.7 mm; B:640 mm; d:600 mm; D1 ≈:786.8 mm; r3,4 min.:4 mm; Calculation factor kr:720; Basic dynamic load rating C:16800 kN; r1,2 min.:20 mm;

Fillet Radius ra:1.00 mm; B:25.40 mm; D:62.0000 mm; Oil Speed Rating n2:10000 rpm; Basic Static Radial Load Rating Co:20400 N; Accessories:Two Seals; Basic Dynamic Radial Load Rating C:30700 N; d:25.000 mm; Sealed Speed Rating n3:7500 rpm; Grease Speed Rating n1:7500 rpm;

α:6 °; h1:110 mm; Mass rod end:1 kg; d:30 mm; d4 ≈:42 mm; l5 ≈:19 mm; w:36 mm; dk:40.7 mm; r1 min.:0.6 mm; l3 min.:45 mm;

D:125.0000 mm; Fillet Radius ra:1.50 mm; Grease Speed Rating n1:4600 rpm; B:24.00 mm; Basic Dynamic Radial Load Rating C:63700 N; Basic Static Radial Load Rating Co:55000 N; d:70.000 mm; Oil Speed Rating n2:6000 rpm;

Basic Static Radial Load Rating Co:163000 N; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; Sealed Speed Rating n3:3200 rpm; Oil Speed Rating n2:4300 rpm; Accessories:No Shield, no Seal,; Grease Speed Rating n1:3200 rpm; B:58.70 mm; d:65.000 mm; D:140.0000 mm;

P180°:96.1 kN; Stabilizing ring:SR-0-24; RG:3/4 NPT; Cap bolt recommended tightening torque:203.4 N·m; H1:160.325 mm; PG:1/4 NPT; J max.:463.55 mm; Eye bolt:2 x 3/8-16 UNC; h:60.325 mm; da:103.188 mm;

Appropriate attachment bolt size G:0.5 in; Lock washer:W 15; ba:32.544 mm; P180°:22.2 kN; J max.:244.475 mm; P150°:18.2 kN; da:75 mm; Pa:14.2 kN; Housing:FSAF 215; Bearing:22215 E;

Da:180 mm; Appropriate attachment bolt size G:0.875 in; J min.:295.275 mm; Cap bolt, SAE grade:5; R1:58.737 mm; R2:30.163 mm; P180°:55.6 kN; N1:25.4 mm; da:107.95 mm; h:39.688 mm;

d:300 mm; Mass shaft washer:5.92 kg; r1,2 min.:2 mm; B:18.5 mm; d1:376 mm;

Accessories:487000 Shield, Seal; Width - Inner Ring B1:24.00 mm; Basic Radial Load Rating-Dynamic DC:29100 N; d:40.000 mm; Speed Rating-Single and Double Sealed Grease SDG:5600 rpm; Basic Interchange NDH:487508; Basic Radial Load Rating-Static SCO:18000 N; Width - Overall B:24.0 mm; Old MRC Bearing

Reference speed:2600 r/min; Limiting speed:3000 r/min; Basic static load rating C0:236 kN; Fatigue load limit Pu:25.5 kN; U:26 mm; Basic dynamic load rating C:72.1 kN; Ew:163 mm; Fw:155 mm; Mass needle roller and cage assembly:0.27 kg;

Accessories:Shield & Seal & Snap; D:72.0000 mm; B:30.20 mm; d:30.000 mm; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:41600 N; Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6300 rpm;